Hornet Artillery 3D Printer. 220x220x250mm
Shipping time 7-9 days
The new Artillery Hornet 3D printer is an all-in-one Cartesian style 3D printer. The Artillery Hornet printer is ultra-quiet and has 32-bit stepper drivers, has a bowden-type extruder, E3D V6 compatible 0.4mm nozzle, dual Z-axis, AC power heated bed and TFT touch screen.
Fast and accurate: The printing speed can reach up to 100mm / s, and with the direct drive extruder, SW-X1 makes high quality printing, especially for flexible filament. With a printing volume of 220x220x250 mm
Artillery Hornet 2021 Technical Specifications:
-Print volume: 220mm x 200mm x 250mm
-Resolution: 0.1mm - 0.32mm
-Print speed: 60mm / s - 100mm / s
-Travel speed: 200mm / s
-Print Surface Type: Artillery Build Plate
-Bed Type: DC Heat Bed
-Number of Extruders: 1
-Bowden type extruder
-Filament Diameter: 1.75mm
-Supported Materials: PLA, TPU, ABS ...
-Printing Technology: FFF (Fused Filament Fabrication)
-Nozzle Diameter: 0.4mm
-Nozzle compatible with E3D V6
-XYZ resolution 0.05mm, 0.05mm, 0.1mm
-Nozzle Temperature: 180ºC - 240ºC
-Average nozzle warm-up time: <3 minutes
-Build plate warm-up time: 80ºC in less than 3 minutes
-Operating sound: <70dBA
-Power consumption: 110V / 220V 350W max (with heated bed on)
-Control Board: Artillery Ruby 32bit Mainboard
-Product Weight: 7.8KG
-Product Dimensions: 470x 450x 510mm （Fully Assembled）
FAST AND ACCURATE: The printing speed can reach up to 100mm / s, and with the direct drive extruder, SW-X1 makes high quality printing, especially for flexible filament. With a printing volume of 220x220x250 mm.
Artillery has a 1 year and 3 month warranty on parts.
There is a return rate, if the defect rate is greater than 3%, Artillery is responsible for the return and if it is less than 3%, the customer must take care of the returns.
For more information: https://desk.zoho.com/portal/evnovo/en/kb/articles/evnovo-limited-warranty